![]() IMPORTANT: Do not allow the computer to enter Sleep (Standby) mode during the update process.By continuing this update process and downloading and updating this firmware, you acknowledge that you are aware and understand that this update cannot be reversed. ![]() Available Hard Disk Space: 200 MB or more.CPU: Intel® processor Note: Core™ Solo and Core Duo processors are not supported.This update process requires the following items for proper updating.To change your settings, please refer to your computer manual or consult the manufacturer. IMPORTANT: For OS X version 10.10 or 10.11, please ensure the Mac OS X Driver Loader has been installed before continuing to update your firmware. This update can only be performed when the remaining battery level has three bars or more. When performing the firmware update, it's recommended to use a fully charged NP-FW50 rechargeable battery pack. Use only the USB cable supplied with the camera.WARNING!!: The camera may not operate properly if the power is interrupted during the update. IMPORTANT: You must initialize the camera after the update is complete.IMPORTANT: Update functionality is not guaranteed with any other USB cable. This will return all settings to their original default values. ![]() To ensure that no other program interferes with the installation, save all work and close all other programs.Please make note of any settings you have changed before performing the update. Go to the directory where the file was downloaded and double-click the Update_ the Update_DSCRX10V200.dmg file to a temporary or download directory (please note this directory for reference).It is highly recommended that you print out these instructions for use as a reference during the installation process.The Taskbar should be clear of applications before proceeding. Make sure the USB Connection Setting is set to "Mass Storage".At the "Firmware Updater" screen, please follow the instructions.At the Password prompt screen, enter the Name and Password for the administrative account, and then click "OK".Double-click the "Firmware Updater" icon.Note: Do not connect the camera to the computer yet.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |